Combat belt hybrid | MD Textil

- original Cobra Buckle made from 7075 aluminum, that holds 18KN.

- One-sided opening isn't possible, both push buttons must be pressed.

- Buckle is designed so it won't open on a load. The load must first be released for the buckle to come loose.

- Class 7a seat belt webbing with a breaking load of 2700kg manufactured to MIL-W-4088.

- Double layered webbing and resin treated for a good balance of strength and comfort.

- The excess length is fixed with Velcro and is cut at an angle for better handling.

- Outside material is Cordura laminate that is PALS + / Molle compatible.

- Continuous hook and loop fastener on the inside.

- The belt is made for outer belt use, so an underbelt is needed.

- 100% handmade in Germany.

- Added molle pouches should be more than 3 columns high for optimal attachment.

To get the correct belt size follow the instructions written below:

- Use the trousers you are going to use the belt with

- Remove your belt if it's on your trousers

- Put the measuring tape through all the loops

- Check the waist measurment